Pre-owned Kittinger Furniture, Kindel Furniture, Baker Furniture and Saybolt-Cleland Furniture

For Sale: Tables

Click photos to view enlargements.

« Page 1 | Page 2 »

	8838 WILLIAMSBURG DINING TABLE BY BAKER FURNITURE CO. This magnificent Neoclassic reproduction of a Boston table, circa 1810, was designed to be portable and store compactly. Made of figurative mahogany with extensive reeding, this table has two gates supported by tapered columnar posts and splayed legs with brass paw feet and casters. This is a perfect table for intimate dining. A custom made table pad is included with this table. NOTE: Previously made by Kittinger as a Model CW177. Height 28 1/2″; 56 1/2″ X 14 3/4″ closed;; 56 1/2″ X 66 5/8″ open;.
	CW 66-2 WILLIAMSBURG DINING TABLE BY KITTINGER This solid mahogany table is a reproduction of a late 18th Century English antique. It features two 24" leaves for seating up to ten. CLICK ON PHOTO TO SEE TABLE WITH LEAVES. Height 28 1/2″; Width 48″; Length 66 1/2″ with Two Leaves 114 1/2″.
	CW65-CW66 48" WILLIAMSBURG TRIPLE PEDESTAL DINING TABLE BY KITTINGER This truly elegant Queen Anne style table is made of solid mahogany, has no veneering and comes with two, 24" leaves for additional seating. The end sections can be used separately as console tables or stored upright thus allowing the center section to be used for more intimate dining or gaming. Height 28 1/2″; Width 48″; Length 99″ with Two Leaves 147″.
	CW65-CW66 57" WILLIAMSBURG TRIPLE PEDESTAL DINING TABLE BY KITTINGER THIS TABLE IS AN EXACT REPRODUCTION OF THE ORIGINAL 57 INCH COLONIAL WILLIAMSBURG ANTIQUE TABLE. IT IS A VERY RARE TABLE AND ONE WITH LIMITED PRODUCTION. Its truly elegant Queen Anne style provides the ultimate in dining luxury. Made of solid mahogany, this table has no veneering, and comes with two, 24" leaves for additional seating. The end sections can be used separately as console tables or stored upright thus allowing the center section to be used for more intimate dining or gaming. Height 28 1/2″; Width 57″; Length 99″ with Two Leaves 147″.
	WA1043-WA1044 WILLIAMSBURG TRIPLE PEDESTAL DINING TABLE BY KITTINGER Inspired by an American antique, circa 1810-1820, this elegant three section dining table will easily accommodate ten without leaves. Made of select solid mahogany, this table features a multi-beaded edge and Regency style tripod legs terminating in brass caster feet giving the table comfort, stability and mobility. 18" leaves are available. Height 29 1/2″; Width 46″; Length 108″.
	CW 117 WILLIAMSBURG DINING TABLE BY KITTINGER "Outstanding" best describes this, circa 1730, reproduction oval gateleg table of robust proportions. It features graceful cabriole legs with superior shell carved knees. With both leaves open, this table easily accommodates six. Height 29″; Width 58″; Length 24″ closed, 70″ open.
	WA1026 WILLIAMSBURG DROP-LEAF DINING TABLE BY KITTINGER This Hepplewhite table is adapted from an original English table, circa 1790, with the addition of two legs for strength and stability. With its drop-leafs, it is the perfect answer for today's smaller dining room settings. Height 29 1/2″; Width 48″; Length 76″ open and 28″ closed.
	WA1022 WILLIAMSBURG DROP-LEAF TABLE BY KITTINGER This handsome Queen Anne style drop-leaf dining table was inspired by a Virginia antique. Its mid-size makes it perfect for a small dining area or breakfast room, and when not in use, it can be closed to conveniently store against a wall or behind a sofa. Height 29 1/2″; Width 42 3/4″; Length 43″ open and 16 1/2″ closed. 2 Available
	CW134 WILLIAMSBURG DROP-LEAF TABLE BY KITTINGER This Rococo style table is an exact reproduction of a New England antique, circa 1750. Made of mahogany, this table has retained the clean lines and crisp carving of the original with its oval top and graceful cabriole legs terminating in ball and claw feet. Height 26 3/4″; Depth 33 1/2″; Width 40 1/2″ open and 13 3/4″ closed. 2 Available
	COLONIAL WILLIAMSBURG TAVERN TABLE BY KITTINGER This extremely rare and very early reproduction, circa 1937, made by Kittinger for Colonial Williamsburg copies an American Federal tavern table from the Mid-Atlantic Region. Like the antique, this table is made of yellow pine and has an original finish displaying wonderfully mellow raised grain, which only comes with age. This table is beautifully crafted with mortise and tenon and peg construction, beaded apron and splayed, tapered legs. This table's design affords multiple uses and for the collector of Kittinger Williamsburg furniture is a "Must Have". Height 24 1/2″; Diameter 15 3/4″.
	CW 25 WILLIAMSBURG TIER TABLE BY KITTINGER Also referred to as a "dumb waiter", this three tier table achieves distinction through its proportions and sturdy but delicate design. It is a copy of an English antique, circa 1760. Height 40″; Diameter 23 3/4 24″.
	CW 40 WILLIAMSBURG CANDLESTAND BY KITTINGER This reproduction of an English antique candlestand, circa 1760, features an octagonal tray top with a hand carved pierced balcony. The tripod base is delicately turned and simply carved with cabriole legs and scroll feet. This is a very early and rare Williamsburg reproduction. Height 43 1/2″; Top 11″ Square.
	CW 49 WILLIAMSBURG CANDLE TABLE BY KITTINGER The original of this handsome reproduction dates to 1740 and features an octagonal tray with gallery and turned pedestal terminating into a tripod base with cabriole legs. This candlestand lends a beautiful accent to any room or hall. Height 38 1/2″; Top 10 1/2″ Square. 2 Available
	WF1206/WA1006 WILLIAMSBURG PEMBROKE TABLE BY KITTINGER This classic Hepplewhite design pembroke table is copied from a late 18th Century American antique. Beautifully proportioned, this table with its clean lines features molding around the drawer and leaves and gracefully tapered legs. Traditionally used flanking a sofa or wing chair, this table can also be used as a game table. Height 28″; Depth 29 3/4″; Width 39″ open and 20 3/4″ closed.
	T204 PHILADELPHIA ROCOCO PEMBROKE TABLE BY KITTINGER This exceptionally fine Kittinger Rococo style pembroke table derives its form from a Philadelphia example, circa 1770. Some of the finer points of this table are its one-board solid mahogany top, open fretwork brackets both front and rear, a deep drawer with applied cockbead molding and a matching faux drawer front at the opposite end allowing for open space use. When fully opened, this table can be used for intimate dining or as a games table. Height 28 1/2″; Depth 31 3/4″; Width 38 1/2″ open and 21″ closed. 2 Available
	T935 PEMBROKE TABLE BY KITTINGER Few tables by Kittinger, such as this rare masterpiece, come to the market. The artistry and expert crafting of this reproduction late 18th Century pembroke table are unrivaled. There is an extensive use of exotic wood inlays including: the top with oval inlay of satinwood and ebony in a field of crotch mahogany; rosewood boarder and edging; and satinwood locking drawer cross-banded in rosewood with maple and ebony inlay. This table is further enhanced by its beautifully scalloped leaves banded in rosewood, the drawer with its delicate sand-cast drop pulls and legs resting on brass casters. This table will surely be a focal point in any room setting. Height 27 1/2″; Depth 27″; Width 38 1/2″ open and 19 1/4″ closed.
	CW 3 WILLIAMSBURG CARD TABLE BY KITTINGER This graceful table, with its thumb-print molding on the flap-top edge, is a mahogany reproduction of an American card table, circa 1770. It is particularly attractive with the flap-top up. CLICK ON PHOTO TO SEE TABLE WITH FLAP-TOP UP. Height 28 3/4″; Length 30 1/4″; Depth 15 3/4″ closed and 31 1/2″ open. 2 Available
	CW 150 WILLIAMSBURG CARD TABLE BY KITTINGER This superbly crafted table is an exact reproduction of a mid-18th Century Queen Anne gaming table. An extremely versatile piece, it can be used with its flap top up against a wall or fully open resting on its fifth leg. Height 30 1/2″; Width 31″; Depth 15″ closed, 30″ open. 2 Available
	CW 156 WILLIAMSBURG CARD TABLE BY KITTINGER This elegant and distinctive card table with its half-round design is a reproduction of a circa 1735 English antique. It features beautiful curvilinear scrolled knee brackets and exotic ball and claw feet. Its design enables it to be folded and pushed against the wall when not in use. This table makes a welcome addition to any room or hall. Height 28 3/4″; Width 32 3/4″; Depth 16 1/4″ closed, 32 1/4″ open.
	CW 141 WILLIAMSBURG FLAP-TOP TABLE BY KITTINGER This multi-functional table is a reproduction of a Queen Anne antique, circa 1720. When closed, it serves as a console table and when opened as a serving or writing table. It features a rectangular folding top supported by slender columnar legs terminating in turned feet. Both sides of the top have candle-slide pulls. CLICK ON PHOTO FOR OPEN VIEW OF TABLE. Height 28 1/2″; Width 35 3/4″; Depth 12″ closed, 24″ open. 2 Available
	WF1259/WA1059 WILLIAMSBURG TABLE BY KITTINGER This elegant Queen Anne sytle table is a reproduction of a Tidewater Virginia antique dating to 1750. Made of mahogany, this table features a distinctive scribed outline around the three drawers which are enhanced by beautiful sand cast brasses. Its versatile size allows this table to be used in various room settings as for example in a hall, next to a bed or at a sofa. Height 27 1/2″; Length 28 3/4″; Depth 18 1/4″.
	CW 157 WILLIAMSBURG LOWBOY/DRESSING TABLE BY KITTINGER This reproduction of a William and Mary style dressing table is copied from an original Pennsylvania, probably Philadelphia, antique dating from 1710-1720. Made of mahogany with an expansive top, this graceful lowboy features a center ogee arch on the case which rests on trumpet legs with a crossed stretcher accented by an urn finial. Height 29 1/2″; Width 36″; Depth 22 1/4″.
	CW 144 WILLIAMSBURG TABLE BY KITTINGER This reproduction of a Queen Anne mahogany table, circa 1740, features a concave tray top with straight skirt, slightly rounded corners and cabriole legs terminating in pad feet. This graceful table can be used in numerous room settings. Height 28 1/2″; Length 30 3/4″; Depth 18 3/4″.
	WF3204/WA1004 WILLIAMSBURG DRESSING TABLE BY KITTINGER Inspired by a Virginia antique, circa 1760-1780, this Rococo table with its neat, clean lines features pierced fretwork brackets and straight legs. It can be used in countless ways such as a writing table, side table, serving table and dressing table. Height 29 1/2″; Length 42″; Depth 21″.
	WF1214/WA1014 WILLIAMSBURG TABLE BY KITTINGER This versatile one drawer, mahogany table can be used as a dressing, writing or occasional table in various room settings. Inspired by a late 18th Century English antique, this interpretation features Marlborough legs and cast brass. Height 28″; Width 28 3/4″; Depth 16″.
	WA1029 WILLIAMSBURG TABLE BY KITTINGER This Hepplewhite table, inspired by an antique in the Williamsburg Collection, is graceful with its slightly tapered legs and appealing proportions. It is perfect as an end or occasional table. Height 29 1/2″; Width 25 1/4″; Depth 18 3/4″. 2 Available
	CW 20 WILLIAMSBURG TILT-TOP TABLE BY KITTINGER This small but distinctive Hepplewhite table is a reproduction of an American antique, circa 1760. Its serpentine top tilts up to form a diamond and can fit easily into any corner. Height 27 1/4″; Top 19 1/2″ X 19 1/2″. 2 Available
	CW 69 WILLIAMSBURG SQUARE TEA TABLE BY KITTINGER The flowing lines of this tilt-top table are taken from an English original, circa 1760. This table is distinguished by a finely carved pedestal and delicate tripod base and makes a beautiful addition to any room setting. Height 26 3/4″; Top 25 5/8″ square.
	A284 PIECRUST TABLE BY KITTINGER This elegant, mahogany tilt-top table is a reproduction of a late 18th Century antique. It is distinguished by the piecrust on its revolving top, gracefully turned shaft with fluting and decorated urn, and cabriole legs with vigorous acanthus carving on the knees terminating in ball and claw feet. This table is an exceptional example of a most sought after form. Height 29″; Diameter 31 3/4″.
	CW 70 WILLIAMSBURG TEA TABLE BY KITTINGER This reproduction is one of the finest examples of a tilt-top, bird-cage table. The original piece is American and dates to 1775. With a revolving top, this table was often used as a tea table during the colonial era. Its graceful turnings, curved legs and claw and ball feet, make it a spectacular addition to any room setting. Height 28 3/4″; Diameter 34 3/4″. 2 Available
	HN 6 HISTORIC NEWPORT TILT-TOP TABLE BY KITTINGER This table, copied from a Rhode Island piece, circa 1780, is very much influenced by Townsend-Goddard with its spiral fluted urn. The revolving bird-cage enables the top to be tilted to a vertical position. Height 28″; Diameter 28 1/4″.
	CW 135 WILLIAMSBURG OVAL TILT-TOP TABLE BY KITTINGER This table dates to the late 18th Century with its tripod legs that terminate in a spade foot. This table works well along side a sofa or chair where maximum table surface area is required in a limited space. Height 27 1/2″; Width 17 3/4″; Depth 26″.
	TJ2123 THOMAS JEFFERSON TABLE BY BIGGS/KITTINGER From the Old Dominion Collection, this fine reproduction of Thomas Jefferson's birdcage candlestand at Monticello is diminutive in size with a delicately turned shaft and cabriole legs terminating in pad feet. The original of this table is believed to have been made by John Hemings, a slave who became a skillful cabinetmaker and executived many of Jefferson's original designs. The overall scale of this table makes it perfect for use where space is a consideration. Height 29″; Diameter 17 1/2″.
	T-244 SCALLOPED TILT-TOP TABLE BY KITTINGER This wonderful Queen Anne style reproduction tilt-top table was taken from a Massachusetts antique. It is not only beautiful, featuring a fully developed scalloped top, but very stable with four cabriole legs. It can serve a multitude of functions, such as a breakfast room table or a card table, comfortable seating four, and can be stored upright when not in use. Height 28″ open, 46 1/2″ upright; Width 33 3/4″.