For Sale: Tables — Page 2

SV 52 OLD STURBRIDGE VILLAGE REPRODUCTION
TILT-TOP TABLE BY KITTINGER

Part of the Old Sturbridge Village Collection, this finely crafted reproduction of a late 18th Century table shown in the parlor of the Salem Towne House beautifully captures all the detail of the original. Made of mahogany, this mid-sized tilt-top table can serve a multitude of uses. The top features a dish moulded edge, graceful turnings on the post and light cabriole legs resting on pad feet.

Height 28 5/8″; Diameter 23″.

OD953 OLD DOMINION PIECRUST TABLE
BY KITTINGER

This wonderful reproduction of a Rococo mahogany tilt-top table is one of the most sought after tables made by Kittinger. A copy of a late 18th Century antique, this table is distinguished by the piecrust on its revolving tilt-top, attached at the stem with bird-cage construction, a gracefully turned shaft resting on cabriole legs with ball and claw feet. This table is in the Kittinger's light heirloom finish.

Height 29 7/8″; Diameter 32″.

CW 70 WILLIAMSBURG TEA TABLE BY KITTINGER

This reproduction is one of the finest examples of a tilt-top, bird-cage table. The original piece is American and dates to 1775. With a revolving top, this table was often used as a tea table during the colonial era. Its graceful turnings, curved legs and claw and ball feet, make it a spectacular addition to any room setting.

Height 28 3/4″; Diameter 34 3/4″.
2 Available

HN 6 HISTORIC NEWPORT TILT-TOP TABLE BY KITTINGER

This table, copied from a Rhode Island piece, circa 1780, is very much influenced by Townsend-Goddard with its spiral fluted urn. The revolving bird-cage enables the top to be tilted to a vertical position.

Height 28″; Diameter 28 1/4″.

T-244 SCALLOPED TILT-TOP TABLE BY KITTINGER

This wonderful Queen Anne style reproduction tilt-top table was taken from a Massachusetts antique. It is not only beautiful, featuring a fully developed scalloped top, but very stable with four cabriole legs. It can serve a multitude of functions, such as a breakfast room table or a card table, comfortable seating four, and can be stored upright when not in use.

Height 28″ open, 46 1/2″ upright; Width 33 3/4″.

CW 313 WILLIAMSBURG NEST OF TABLES BY KITTINGER

As in the English originals from the Federal period, the tops of these four tables are made of highly-figured rosewood. Perfect for use in entertaining or next to seating, these tables are easily portable and can be neatly stacked.

Set Height 29 3/8″; Set Length 23 1/16″; Set Depth 13″.

T363 BUTLER TRAY TABLE BY KITTINGER

This mahogany table is considered one of the best examples found in the marketplace with excellent proportions and attention to detail, most notable, the rolled edges of the drop sides and open fret brackets at the corner of the legs.

Height 18 1/2″; Top Closed 32 1/2″ X 20 1/2″; Top Open 43″ X 31″.
2 Available

WA1042 WILLIAMSBURG COFFEE TABLE BY KITTINGER

This is an adaptation of a late 18th Century butler's table fashioned in mahogany.

Height 21 1/2″; Width 27 3/4″; Depth 21 3/4″.
2 Available

WF1235/WA1035 WILLIAMSBURG DROP-LEAF COFFEE TABLE BY KITTINGER

Adapted from a taller, Rococo style American breakfast table, circa 1760-1780, this table with its clean lines, cross stretchers, squared legs and pierced side brackets makes a perfect addition to a family room.

Height 18 3/4″; Width 35″ open and 20 1/8″ closed; Length 42″.

HN 4 HISTORIC NEWPORT TEA TABLE BY KITTINGER

The original of this table is in the collection of the Newport Historical Society. Its convex molding forming the tray top, square section of the legs, and slipper feet clearly show this is a Townsend-Goddard design.

Height 26 1/2″; Width 31 3/4″; Depth 22 1/4″.

CW 8 WILLIAMSBURG TEA TABLE BY KITTINGER

The original of this superb 18th Century tea table is in the Williamsburg Masterworks Gallery. As shown, this exact reproduction features pull-out candle slides, scalloped apron and graceful cabriole legs.

Height 26 1/2″; Width 30 1/2″; Depth 19 1/2″.
2 Available

WA1009 WILLIAMSBURG TABLE BY KITTINGER

This sturdy mahogany table with tripod legs was adapted from an English piece, circa 1760-1775.

Height 27 1/4″; Top 25″ X 25″.

WF1220/WA1020 WILLIAMSBURG DROP-LEAF TABLE BY KITTINGER

This adaptation of an American Queen Anne style table, circa 1730, has a single drop-leaf with cabriole legs terminating in pad feet.

Height 25 3/4″; Length 31″; Width 23 1/2″ open and 13 1/2″ closed.

CW 11 WILLIAMSBURG TILT-TOP TABLE BY KITTINGER

With its intricate bird-cage construction connecting the revolving tilt-top to the base, this intermediate-size table can serve a multitude of uses. It is a faithful reproduction of an American antique dating to the last quarter of the 18th Century.

Height 27″; Diameter 21 1/2″.
2 Available

CW 135 WILLIAMSBURG OVAL TILT-TOP TABLE BY KITTINGER

This table dates to the late 18th Century with its tripod legs that terminate in a spade foot. This table works well along side a sofa or chair where maximum table surface area is required in a limited space.

Height 27 1/2″; Width 17 3/4″; Depth 26″.

CW 149 WILLIAMSBURG KETTLE STAND BY KITTINGER

This striking copper top mahogany table is an exact reproduction of an English antique, circa 1725-1730. It is the perfect companion to a wing chair or can be used to display flowers. Its copper top is impervious to stains and its size makes it most versatile.

Height 21″; Diameter 10″.
2 Available

WF1210/WA1010 WILLIAMSBURG CANDLE TABLE BY KITTINGER

This adaptation of a Queen Anne table, circa 1760, is perfect as a small occasional or end table.

Height 26 3/4″; Top Diameter 20 1/4″.
2 Available

T-NC9 WINE TABLE BY KITTINGER

This vintage Kittinger wine table is crafted from solid mahagony and makes a perfect accent piece in a variety of room settings. Truly elegant, this table with its Federal design has a well turned, crisp center shaft resting on delicately skived spider legs.

Height 25 1/2″; Diameter 15 7/8″.

T239 WINE TABLE
BY KITTINGER

This exceptional reproduction of a Hepplewhite style wine table is made of solid mahagony. Elegant and graceful in its design, this wine table features a pull out tray for serving, cock beaded apron and delicate tapered legs.

Height 24 1/2″; Diameter 16 1/2″.

OD2051 OLD DOMINION OVAL TABLE
BY BIGGS/KITTINGER

This beautiful Hepplewhite style oval table features both tapered legs and apron with delicate string inlay. Its diminutive size and grace make it perfect as an end or occasional table.

Height 26″; Width 14 1/2″; Length 19 1/2″.
2 Available

T158 TABLE BY KITTINGER

This elegant mahogany table features an inset satinwood panel in the center of the top, brass handles and cock-beaded scalloped boarder. It can be used as a tea table or occassional table in various room settings.

Height 22″; Width 24″; Depth 17 1/2″.
2 Available

77-865 ELLIPTICAL TABLE BY KINDEL FURNITURE COMPANY

The top of this Regency style cocktail table is figured mahogany veneer framed with cross-banded prima vera veneer. The turned shaft is solid mahogany with four acanthus leaf decorated legs terminating in brass casters for ease of mobility.

Height 18 1/2″; Width 48″; Depth 30″.

CW 5 WILLIAMSBURG BASIN STAND BY KITTINGER

This is a reproduction of a circa 1740 wash basin stand used for bathing in a bedroom. It holds a wash bowl on top with two drawers for toiletries and a bottom shelf for a water urn. This piece makes a beautiful planter. (Bowl shown in photo is sold separately.)

Height 32″; Diameter 11 3/4″.
2 Available

T731-2 CORNER BASIN STAND BY KITTINGER

One of the finer Kittinger reproductions is this corner basin stand in the Hepplewhite style. This basin stand is an exact copy of an exceptionally refined New England antique dating to 1780. Made of beautifully grained mahogany, there is satinwood string inlay decorating the basin shelf as well as the center shelf drawer and two drawer effects on either side. This beautifully graceful piece features a dovetailed backsplash with upper shelf and is fitted with a CW9 Williamsburg pewter basin by Stieff.

Height 46 1/2″; Width and Depth at Center Shelf 18″; Width and Depth at Base 20″.

CW 2 WILLIAMSBURG CORNER TABLE BY KITTINGER

This handsome mahogany reproduction table, with flowing cabriole legs and scalloped apron, is copied from a Massachusetts antique, circa 1750.

Height 26 3/4″; Width 35″;
Depth 18″ closed, 25″ x 25″ opened.
2 Available

WILLIAMSBURG FLOOR LAMPS

Unusually attractive, these very rare mahogany floor lamps are highly desired for their size and design. They are perfect for small spaces where there is no room for a lamp and a table.

LEFT — L5 Kettle Stand Floor Lamp
with Virginia Metalcrafters 16-10 swirl-base brass candlestick.
Overall Height 54″; Table Height 28″; Table Diameter 12″.

RIGHT — L10 Candle Stand Floor Lamp
with rare hexagonal table and octagonal Stieff CW30 pewter stick.
Overall Height 52″; Table Height 25″; Table Diameter 10 1/2″.

L5 Floor Lamp Available